Portal Type Pay-off and Take-up
Product Details
1. Introduction
It is mainly used for all kinds of cable extrusion, rewinding lines, etc. to pay-off from the bobbin or rewind into a reel.
2. Structural Features
1) Gantry floor track walking type, top or bottom casing structure.
2）Welded frame with high quality steel plate, shaftless opening and closing mechanism, loading and unloading of bobbins without crane.
3)The bottom beam and column are all of folded plate structure, neat and beautiful in appearance.
4) The whole machine together with the bobbin travels on the ground track to line up the cable, which realizes the alignment of the discharge and collection of the cable, and the cable does not produce transverse bending deformation.
5) The take-up gearbox adopts a hardened gearbox with high transmission torque and low noise.
6) The line is programmable by PLC control, according to the input line diameter, to achieve automatic tracking line, synchronous operation with the host.
3. Technical Parameters
|
Model |
LSP/LF 2000 |
LSP、LF 2500 |
LSP/LF 3150 |
LSP/LF 4200 |
LSP/LF 5000 |
|
Applicable bobbins（mm） |
Φ800～Φ2000 |
Φ1250～Φ2500 |
Φ1600～Φ3150 |
Φ2000～Φ4200 |
Φ2500～Φ5000 |
|
Load capacity (t) |
max.8 |
max.10 |
max.15/20(Heavy) |
max.22 |
max.60 |
|
Applicable wire diameter（mm) |
Φ7～Φ70 |
Φ10～Φ110 |
Φ12～Φ130 |
Φ15～Φ150 |
Φ50～Φ200 |
|
Take-up speed (m/min) |
3～100 |
2～80 |
1.5～50 |
1.5～40 |
1～30 |
|
Take-up accuracy(%) |
1～2 |
||||
FAQ
Q: Can I visit your factory?
A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.
Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.
-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.
Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.
Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.
Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.
Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.
Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.
Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.
