OEM Supply Cable Coiling Equipment - Building Wire Extrusion Line (Suitable for 1.5-16mm²) – LINT TOP
Product Details
OEM Supply Cable Coiling Equipment - Building Wire Extrusion Line (Suitable for 1.5-16mm²) – LINT TOP Detail:
1. Introduction
Building wires insulation lines are suitable for several thermoplastic compounds such as PVC, PE, XLPE and LSHF. Optional insulation line can be equipped with a co-extruder for color skinning & stripping purposes and the range is completed with THHN insulation lines by including a tandem extruder for PA(Nylon) outer jacketing.
2. Features
1. HMI(touch screen) + Siemens 300/1200 PLC, provides a friendly operating interface for the process control.
2. Compact designed extruders are easy for installation and maintenance.
3. The special screw and barrel with efficient heating and cooling system can provide high linear output over a wide range of speeds.
4. The advanced monitoring and control system(90-120s) ensure the tight tolerance(±2%), and the crosshead and extrusion toolings ensure a good-centered insulation/sheath.
3. Technical Parameters
|
Model |
90+65 |
100+65 |
120+90 |
|
Cross Section of Inlet Wire (mm2) |
1.5-10 |
1.5-10 |
1.5-16 |
|
Finished Dia. (mm) |
Max. 7 |
Max. 7 |
Max. 14 |
|
Line Speed (m/min) |
600 |
800 |
1000 |
|
1000 Auto dual-spool take up |
1000 Auto dual-spool take up |
1250 Auto dual-spool take up |
|
|
Flyer pay-off |
Flyer pay-off |
Flyer pay-off |
|
|
Wire Dia. Control Precision (mm) |
±0.05 |
±0.05 |
±0.05 |
|
Extrude Capacity (kg/h) |
90:360 |
100:450 |
120:900 |
|
65:120 |
65:120 |
90:360 |
Product detail pictures:
Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for OEM Supply Cable Coiling Equipment - Building Wire Extrusion Line (Suitable for 1.5-16mm²) – LINT TOP , The product will supply to all over the world, such as: Russia, Mexico, Miami, We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our best to meet your needs.
FAQ
Q: Can I visit your factory?
A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.
Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.
-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.
Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.
Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.
Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.
Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.
Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.
Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.
