This month of February saw the first trip abroad of two members of our LINT TOP Africa Center office since the year 2019.
What a pleasure to meet our customers and to cross the gap created by the Covid pandemic and which has generated a very heavy physical separation to be borne by both us and our customers.
Indeed, members of LINT TOP CABLE TECHNOLOGY CO., LTD. have become accustomed to frequent visits to customers and to always listen to them and be present by their side, this forced separation has therefore been very hard to bear.
Fortunately, the end of the tunnel finally appears and the future seems to be bright again for the good of all.
Our first destination was therefore Tunisia, this neighboring country, this sister country, which is experiencing a rather remarkable industrial dynamic despite the difficulties generated by more than two years of pandemic, following the example of all the countries of the world.
This first trip was nothing but happiness in finding our customers with the addition of the obtaining of a new turnkey project for the realization of the range of low voltage domestic cables.
Indeed, Tunisia, like Algeria and many other African countries invest heavily in the field of transport and distribution of electrical energy, which requires the production of large quantities of cables of all types and for which LINT TOP CABLE TECHNOLOGY CO., LTD presents complete turnkey solutions with the supply of high quality equipment.
LINT TOP CABLE TECHNOLOGY CO., LTD will provide our new customer and as for all our customers all the necessary technical support in an unfailing and continuous manner, in addition to all the equipment necessary for his project, namely :
1 - 17 dies copper medium drawing machine with annealer and spooler
The line is supplied with all the necessary accessories, the electrical, electronic and mechanical parts are world-renowned brands. The range of drawn wire diameters which vary from 0.4 mm to 1.8 mm produced at speeds between a minimum of 400 meters per minute to a maximum of 1400 meters per minute.
2 - 22 dies copper fine wire drawing machine with dual inverter :
The line is supplied with all the necessary accessories, the electrical, electronic and mechanical parts are from world famous brands. The range of drawn wire diameters which vary from 0.2 mm to 0.5 mm produced at speeds between a minimum of 800 meters per minute to a maximum of 1300 meters per minute.
3 - 630 bunching machine :
The machine is used for the multistrand twisting of bare copper, coated tin, coated silver, copper-clad aluminium wire, enamelled wire, and other special alloy wires. Regular twisted wires can be done by this buncher instead by stranding machine.
The line is supplied with all the necessary accessories.
The electrical, electronic and mechanical components are of world-renowned brands.
The twisted bow max. rotation speed is 2000RPM.
4 - 1250 bunching machine
The production range of this machine is as follows: Twisted cross-sectional area: hard structure 4-35mm² soft structure 4-50mm²;
(Round compacted conductor: max 7*2.52mm , flexible conductor cross-section: max 50mm²)
The maximum rotation speed is 500RPM (1000 twist/min)
The line is supplied with all the necessary accessories.
The electrical, electronic and mechanical components are of world-renowned brands.
5 - 70+35 EXTRUDER (INSULATOR) :
- Extruding material: PVC, XLPO
-Conductor type: single, multiple stranded wire
-Conductor cross section: (1-25) mm²
- Conductor nominal diameter: (1-8) mm
- Insulation outer diameter: (2-12) mm
-Wire speed: max. 300m/min (depending on the actual finished outer diameter
The line is supplied with all the necessary accessories.
The electrical, electronic and mechanical components are of world-renowned brands.
6 - 90 extruder (sheathing layer) :
-Extruding material: PVC, XLPO
-Inlet wire type: multi-stranded, bunching stranded and insulated core wire.
-Inlet wire diameter: (2.5 - 12) mm
-Finished sheath outer diameter: (3.5-16)mm
-Machine design wire speed: max. 200m/min Max (depending on actual finished outer diameter)
The line is supplied with all the necessary accessories.
The electrical, electronic and mechanical components are of world-renowned brands.
7 - 1246 Automatic coiling machine With full seal thermal shrinking
The machine is used for cable automatic coiling, binding, and labeling machine.
- Suitable wire range: 1-12mm
- Mechanical design line speed: Max180 m / min; (based on the completion of the outer diameter)
La ligne est fourni avec l'ensemble des accessoires nécessaires à savoir, Thermal shrink packaging machine, Reel Conveyor and Automatic binding machine .
The electrical, electronic and mechanical components are of world-renowned brands.
8 - Semi-automatic coiling machine
The electrical, electronic and mechanical components are of world-renowned brands.
In addition to all these production equipments, LINT TOP CABLE TECHNOLOGY CO., LTD will also provide the customer with all the auxiliary equipment such as bobbins, welders, printers and all the test equipment necessary to carry out all the necessary tests on the products in accordance with the standards in force.
LINT TOP CABLE TECHNOLOGY CO., LTD, is undoubtedly the best partner for turnkey projects in the field of electrical cable manufacturing.