Manufacturer of Drum Type Stranding Machine - Compounding Line / Pelletizing Line – LINT TOP

Product Details

FAQ

Product Details

We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for Ftth Cable, Strander, Cable Spooling Machine, Sincerely hope we are growing up together with our customers all over the world.

Manufacturer of Drum Type Stranding Machine - Compounding Line / Pelletizing Line – LINT TOP Detail:

1. Introduction

The CTE PLUS two-stage compounding and pelletizing system is mainly designed for the modification and compounding of heat and shear sensitive materials. Its two-stage set-up and the modular principle of the process section allow highly efficient compounding of applications such as PVC, XLPE and HFFR cable compounds, soft PVC, medical compounds, EVA footwear compounds, etc.

2. Features

1. New gearboxes of the CTE PLUS that can bear a specific torque of 7.2 Nm/cm³ is designed to improve reliability and service life.
2. Gearbox housing manufactured in-house with CNC machine of Heller, Germany, and inspected with 3-dimensional inspection machine of Carl Zeiss, Germany.
3. Ideal configuration due to modular design, process section can be equipped according to requirements and wide range of available equipment.
4. Due to its tight and self-wiping profile, the close intermeshing twin screws of the extruder eliminate stagnant zones over the whole length of the process section.
5. Two operation and maintenance friendly machine control concepts: Basic Master(relay control) and Touch Master (PLC control).
6. Final assembly of each CTE PLUS will be inspected with 3-D coordinate detector of Faro, Switzerland. Each CTE PLUS extrusion system will be subjected to Factory Acceptance Test (FAT) before delivery to ensure high quality standards.

3. Technical Parameters

	Model	Screw Dia. (mm)	Max. Screw Speed Main Motor (rpm)	Main Motor Power (KW)	Throughput (kg/h)
CTE 50-120 PLUS two-stage	CTE 50 PLUS	51	400/500/600	37-55	100-300
CTE 50-120 PLUS two-stage	SE 120	100	60/85	18.5-22
CTE 65-150 PLUS two-stage	CTE 65PLUS	62	400/500/600	55-90	150-500
CTE 65-150 PLUS two-stage	SE 150	150	60/85	37-45
CTE 75-180 PLUS two-stage	CTE 75PLUS	71	400/500/600	110-160	300-900
CTE 75-180 PLUS two-stage	SE 180	180	60/85	45-55
CTE 96-200 PLUS two-stage	CTE96 PLUS	94	400/500/600	220-315	600-1800
CTE 96-200 PLUS two-stage	SE 200	200	60/85	55-75

(Note: We also have STS MC 11 series pelletizing line produced under CE standard, with higher productivity and better granulators quality. Please contact us for the details.)

Product detail pictures:

FAQ

Q: Can I visit your factory?

A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.

Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.

-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.

Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.

Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.

Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.

Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.

Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.