China Buy Laser Labeling Machine Factories - Cantilever Type Rewinding Line – LINT TOP

Product Details

FAQ

Product Details

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Types Of Drawing Lines, Laser Wire Marking, Rewinding Equipment, At our firm with good quality initially as our motto, we manufacture merchandise that are entirely made in Japan, from materials procurement to processing. This enables them for being used with confident peace of mind.

China Buy Laser Labeling Machine Factories - Cantilever Type Rewinding Line – LINT TOP Detail:

1. Introduction

Rewinding line is used to rewind bare conductors, insulated wire, cable or sheath wire from one type/size of reel to another suitable type/size of reel. The purpose is to meet the production requirements of the next process or to meet the products required delivery length and packaging of the customer.
Our cantilever type rewinding line can meet the requirements of rewinding a wide range of products, providing our customers with the best solution.
The cantilever type rewinding line consists of cantilever type pay-off, alignment device,tension dancer, metre counter, wire frame, cantilever type take-up and electrical control system, etc. In order to achieve online inspection of cable outer diameter and surface defects, we can also equipped online inspection instruments such as diameter gauge and spark tester according to customer's requirements.

2. Features

1) The forms of pay-off are active and passive to meet the pay-off of different wire diameter products.
2) In order to prevent disorderly stopping of the wire when rewinding at high speed, it can be equipped with different forms of braking devices, such as magnetic powder braking, mechanical braking, etc.
3) With functions of wire breakage stop, spark detection short circuit alarm, outer diameter out of tolerance alarm, reverse wire length setting, meter to stop, etc.
4) The main electrical appliances adopt international famous brands, such as Siemens, Schneider, Danfoss, etc.

3. Models

Our cantilever type rewinding line can be loaded with metal, plastic and wooden spools that meet DIN standards.

Type	LT630	LT800	LT1000	LT1250
Applicable bobbin (mm)	Φ500~Φ630	Φ500~Φ800	Φ630~Φ1000	Φ800~Φ1250
Applicable wire diameter (mm)	3.0~10.0	≤15	≤20	≤25
Rewinding speed (m/min)	≤150	≤150	≤120	≤100

Product detail pictures:

FAQ

Q: Can I visit your factory?

A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.

Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.

-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.

Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.

Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.

Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.

Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.

Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.