China Buy Bow Skip Stranding Machine Suppliers - Vertical Enameling Machine – LINT TOP
Product Details
China Buy Bow Skip Stranding Machine Suppliers - Vertical Enameling Machine – LINT TOP Detail:
1. Introduction
This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t.
2. Features
1. High Efficiency: PLC automatic control
2. Environmental protection: PLC auto exhaust value
3. Environment Data: VOC≤20mg/m³
3. Technical Parameters
|
Model |
LT-8000V-1/19*-6 |
LT-8000V-1/14*2-8 |
LT-8000V-1/8*2-9 |
|
Wire Range (mm) |
Cu: Φ0.80-1.50 Al: Φ0.80-1.80 |
Cu: Φ1.20-2.50 Al: Φ1.20-2.80 |
Cu: Φ0.80-1.30 Al: Φ0.80-3.5 |
|
DV Value |
25 |
25 |
25 |
|
Total DV |
950 |
700 |
400 |
|
Lines |
38 |
28 |
16 |
|
Inline Drawing |
/ |
/ |
/ |
|
2 |
2/4 |
2/4 |
|
|
Install Power (Kw) |
295 |
295 |
295 |
|
Out Put (Kgs/24Hrs) |
3300(Cu: Φ1.20mm) |
4240(Cu:Φ2.0mm) |
2420(Cu: Φ2.0mm) |
|
Power Consumption (KwH/24Hrs) |
1800-2000 |
2000-2200 |
2000-2200 |
|
Consumption/kg |
0.52KwH/Kg(Cu) |
0.42KwH/Kg(Cu) |
0.72KwH/Kg(Cu) |
|
Environment Data VOC (mg/m³) |
≤20 |
≤20 |
≤20 |
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for China Buy Bow Skip Stranding Machine Suppliers - Vertical Enameling Machine – LINT TOP , The product will supply to all over the world, such as: Moscow, Puerto Rico, Bangkok, Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We've been able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and items. For anyone who is interested in our company and products, be sure to make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are about to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please genuinely feel no cost to speak to us for enterprise. nd we believe we have been gonna share the most effective trading practical experience with all our merchants.
FAQ
Q: Can I visit your factory?
A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.
Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.
-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.
Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.
Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.
Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.
Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.
Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.
Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.
