2019 China New Design Water Blocking Tape - Phlogopite Mica Tape – LINT TOP
Product Details
2019 China New Design Water Blocking Tape - Phlogopite Mica Tape – LINT TOP Detail:
1. Introduction
Phlogopite mica tape is a refractory mica tape which is made of phlogopite paper, reinforced with glass fiber cloth and compounded with silicone resin as the binder. Phlogopite mica tape is divided into single-sided phlogopite fiber cloth mica tape and double-sided phlogopite fiber cloth mica tape, in which the single-sided phlogopite mica tape is reinforced with single-sided fiber cloth and the double-sided phlogopite mica tape is reinforced with double-sided fiber cloth.
Phlogopite mica tape is used for the refractory layer and temperature-resistant enhancement layer of fire-resistant cables and high-temperature resistant cables. It has features of strong insulation and fire resistance, high temperature resistance and fire resistance grade, good fire resistance, acid and alkali resistance, and corona resistance and radiation resistance. It can effectively protect the normal operation of the cable under the condition of high temperature and fire. It is the most ideal material for manufacturing refractory cables.
2. Parameters
|
Item |
Nominal thickness (mm) |
Mica content (%) |
Dielectric strength (MV/m) |
Tensile strength (N/10mm) |
Volume resistance (Ω·m) |
Fire grades (℃) |
|
Single-sided |
0.10 |
≥60 |
≥10 |
≥60 |
1×1010 |
750～800 |
|
0.12 |
||||||
|
0.14 |
||||||
|
Double-sided |
0.13 |
≥55 |
≥8 |
≥80 |
||
|
0.14 |
||||||
|
0.16 |
Product detail pictures:
Related Product Guide:
Our products are greatly recognized and trustworthy by users and will fulfill continually shifting economic and social requires for 2019 China New Design Water Blocking Tape - Phlogopite Mica Tape – LINT TOP , The product will supply to all over the world, such as: Belarus, Nairobi, Canberra, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
FAQ
Q: Can I visit your factory?
A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.
Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.
-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.
Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.
Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.
Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.
Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.
Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.
Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.
